Our Lightest ever.
The CleanSpace WORK.
The new CleanSpace WORK is our lightest PAPR yet, offering 99.95% filtration efficiency for supreme protection against airborne particles.
Available now
Your CleanSpace WORK kit includes:
Your selected size of half mask and fabric head harness
Universal battery charger
Neck support x 2 (small and medium)
Particulate filter
Power unit & Quick Start guide
Now you can have high-level protection with a lightweight, comfortable experience, ensuring that you can be free to work with ease.
Available nowCleanSpace WORK makes working in dust-contaminated environments easier:
- TM3 P3 Filtration, suitable for protection against airborne particulates and dust
- AirSensit® Technology provides on-demand positive-pressure air
- Lightweight (340 grams) and comfortable to wear
- Battery life of up to 8 hours*
- Certified to be worn with half face mask or full-face mask
- Comfortable to wear with a fabric head-harness
- Rear hook provides enhanced weight distribution
- Battery charge is maintained between uses so that it is ready to work when you need it
- 1 year product warranty**
- *Operating time is strongly affected by filter type, filter loading, mask seal, work rate, altitude, and other factors. The operating times quoted above are average durations at moderate work rates at sea level. Actual operating times may vary widely from the quoted average durations.
- **Refer to your supplier for further information.
Tech Specs
Features
- Lightweight, compact and comfortable
- Power unit fully supported by head harness with no weight on neck.
- One power button for simple operation
- AirSensit® Technology:
- mask pressure control and breath responsive airflow
- filter life management
- battery life management
- Long run time and short battery recharge time
- Long term storage technology maintains battery charge for 1 year
- IP 66 Rating: Resistant to dust and liquid ingress
- Suitable for wet environments
Approvals
- EN129421998+A2:2008 TM3
- AS/NZS1716:2012 PAPR-P3 (P2 with Half Mask)
- IP Rating 66
Applications
Suitable for environments which require respiratory protection against airborne particulate contaminates.
Examples (use is not limited to these examples):
- Construction - Cutting and grinding concrete, stone, brickwork, steel; sanding plaster, handing cement or other fine dusts
- Woodwork - Cutting, turning or sanding timber
- Agriculture - mowing, reaping and mulching operations; processing or handling animal feeds, grain or other dusty substances
The CleanSpace WORK System (CS3000WORK) is suitable for applications where decontaminations showers are used.
Specifications
- Product Weight: 350 g
- Dimensions: 195 mm x 160 mm x 55 mm (approximate)
- Peak Airflow: 200 l/min
- Battery: Lithium-ion polymer
- Operating Time: up to 8 hrs
- Battery recharge time: < 2hrs
- AC Adaptor Charger: Input 100 – 240V, 50 to 60Hz, output 14.7Vdc ±5%, 24W
Use, Charging & Storage Conditions
- Use temperature range: : –10°C to +45°C (14°F to +113°F) at < 90% relative humidity
- Charging temperature range: 0°C to 35°C (32°F to 95°F)
- Storage conditions: +10°C to +30°C (+50°F to +86°F) at < 75% relative humidity
- Battery charge maintained for up to one year when in storage
Limitations
CleanSpace respirators are air filtering, fan assisted, positive pressure systems and designed to be worn in environments where there is sufficient oxygen to breathe safely. Do not use CleanSpace WORK in environments that are immediately dangerous to life or health (IDLH), to protect against gases/vapours, or in oxygen enriched or deficient atmospheres.
CleanSpace WORK power units are NOT suitable for intrinsically safe certified operations.