CleanSpace HALO Full Face Masks are specifically designed to work to complete the CleanSpace HALO system. Compatible with CleanSpace HALO Respirators, the Full Face Masks clip quickly onto the power units and provide good panoramic vision. Inner Orinasal Masks are made of soft silicone that readily moulds to the face and does not cause allergic dermatitis. IMPORTANT: If you require intrinsically safe equipment, please consult your site Intrinsically Safe approvals. These Masks are NOT certified intrinsically safe.
Compatible with the CleanSpace HALO (CS3000) power unit
Standards
AS/NZS1716: 2012
EN 12942
IEC 60529 IP-66
AS / NZS 1337.1:2010 High Impact Resistance
Classification
PAPR-P3 Full Face Mask
Particles: 6 Protected against all dust — ‘dust-tight’;
Liquids: 6 Protected against Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects. Test duration: at least 3 minutes, Water volume: 100 litres per minute, Pressure: 100 kPa at distance of 3 m).
CleanSpace HALO with Full Face Mask are suitable for asbestos removal and chemical applications where decontamination showers are used.
Specifically designed for use with decontamination operations, particularly where showering is required; long term use in areas demanding very high levels of protection; tasks where eye protection is required. Primary healthcare facilities, pharmaceutical production, laboratories, animal research facilities and emergency/disaster responders. Suitable for protection against particulates including airbourne biohazards.
Online training available with verification for compliance purposes. Register Here.
CleanSpace respirators are air filtering, fan assisted positive pressure masks and designed to be worn in environments where there is sufficient oxygen to breathe safely. Do not use the CleanSpace in IDLH atmospheres, to protect against gases/vapours that cannot be filtered, or in Oxygen enriched or deficient atmospheres.