A powered air purifying respirator (PAPR) designed to provide high protection

  • Comfortable and easy to wear over long periods
  • Lightweight 500g
  • No hoses, belts or waist mounted battery packs
  • Particulate and gas filters available.
Request a demonstration
Lightweight (500g) and compact
Water tolerant
No hoses, cables or belt mounted battery packs
Compatible with CleanSpace Full Face Masks
Up to 8 hours run time
Portacount fit testing
No servicing or maintenance
Few parts and low inventory
Compatibility with PPE
Particulate and gas filters available
EN 12942:1998+A2:2008 TM3 (Europe)
SANS 10338: 2009 (NRCS/8072/0090) (South Africa)
AS/NZS1716:2012 PAPR-P2 (Australia/NZ)
ISO 9001 (Quality Management System)
IP Rating 66 (water tolerance)
Metal fabrication and welding
Chemical or biological material handling
Maintenance and cleaning
Grain and food handling;
High dust environments; mining and quarry
Stone, cement and concrete handling
Positive pressure and breath responsive respirator
Visual and Audible Alarms – 75dB(A) – at ear
Maximum air flow – 220L/min
Automatic Switch-Off – 3 minutes after idle
Weight (Power unit) – 500g
AC Adaptor charger: Input range 100 – 240V
Internal battery duration – UP to 8 hours
Output range 13.5V ± 5%
Internal battery charging time < 2 hours (to 95%)
Compatible with CleanSpace silicone half masks
Operating temperatures: -10°C to 45°C
Storage (before and after use):
Charging temperatures: 0°C to 35°C.
Clean & dry environment: 30% – 50% RH
Storage Temperatures: -10°C to 35°C.
Out of direct sunlight and away from corrosive or harsh chemicals
CleanSpace Respirators are an air filtering, fan assisted positive pressure mask and is designed to be worn in environments where there is sufficient oxygen to breathe safely
DO NOT USE the CleanSpace Respirators in IDLH, or in Oxygen enriched or deficient atmospheres, to protect against gases/vapours that cannot be filtered