A major innovation in Personal Respiratory Protection for Healthcare.

Designed by biomedical engineers. A lightweight compact powered respirator. Minimal parts. Ergonomic with no cables, hoses or helmets.

  • Lightweight (350g/1 lb) and compact
  • High protection for biohazards (APF 50 & 1000)
  • No hoses or belt mounted battery packs
  • Reliable, fast cleaning and disinfection
  • CE Mark approved
Lightweight (350g/1 lb) and compact
No hoses or belt mounted battery packs
High protection for biohazards (APF 50 & 1000)
Reliable, fast cleaning and disinfection
Up to 9 hours run time
Easy Don and doff
On demand airflow 230 L/min
Small inventory requirements
EN 12942:1998+A2:2008 TM3 (Europe)
ISO 9001 (Quality Management System)
AS/NZS1716:2012 PAPR-P2 (Australia/NZ)
IP Rated 66 (Water tolerant)
Clinical care, infectious disease and emergency care
Pharmaceutical and bio-production facilities
Research facilities
First responders
Handling & disposal of biohazards
Positive pressure and breath responsive respirator
Visual and Audible Alarms – 75dB(A) – at ear
Maximum air flow – 230 L/min
Automatic Switch-Off – 3 minutes after idle
Weight (Power unit) – 350g/1 lb
AC Adaptor charger: Input range 100 – 240V
Internal battery duration – UP to 9 hours
Output range 13.5V ± 5%
Internal battery charging time < 2 hours (to 95%)
Compatible with CleanSpace (3) silicone half mask and full face masks
Operating altitude: 6,562 ft (2,000m)
Operating temperatures: -10°C to 45°C
Storage (before and after use):
Charging temperatures: 0°C to 35°C.
Clean & dry environment: 30% – 50% RH
Storage Temperatures: -10°C to 35°C.
Out of direct sunlight and away from corrosive or harsh chemicals
CleanSpace Respirators are an air filtering, fan assisted positive pressure mask and is designed to be worn in environments where there is sufficient oxygen to breathe safely
DO NOT USE the CleanSpace Respirators in IDLH, or in Oxygen enriched or deficient atmospheres, to protect against gases/vapours that cannot be filtered