CLEANSPACE™

PROTECTIVE COVER AND PRE-FILTER

The CleanSpace Protective Cover and Pre-Filter is suitable for protection against airborne particulates (dust, mists and fumes). The Protective Cover and Pre-Filter is designed to remove course particles and enhance the life of the Particulate P3 Filter (PAF-0035, PAF-0059). The Protective Cover and Pre-Filter should be changed after each use.

IMPORTANT: When selecting a CleanSpace Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use.

Download Data Sheet
Compatible with CleanSpace Ultra and CleanSpace EX Respirators

Standard
AS/NZS1716: 2012
EN 12942
Classification
PAPR-P3
Used with the revolutionary CleanSpace – a light weight PAPR with no hoses/belts
Materials: Spun polymer fibres
Easy and quickly fitted and removed from the power unit
Sold in Pack of 20
Compatible with all CleanSpace Respirators
Packaged weight: 216g. Dimensions: 335mm x 230mm x 65mm
Packaged Shelf life: 5 years from manufacturing date
Materials: Spun polymer fibres
Storage and Use: –10°C to +55°C (–4°F to +131°F) at <90% relative humidity. Store away from direct sunlight, grease and oil
These filters are not water proof and should be replaced if in contact with water
Mining, Welding, Manufacturing, Smelting, Construction, Recycling Plants, Emergency Services, Agriculture, Processing Plants, Grinding, Powder Coating
Refer to Filter Selection Table for more details
Online training available with verification for compliance purposes. Register HERE.
CleanSpace respirators are air filtering, fan assisted positive pressure masks and designed to be worn in environments where there is sufficient oxygen to breathe safely. Do not use the CleanSpace in IDLH atmospheres, to protect against gases/vapours that cannot be filtered, or in Oxygen enriched or deficient atmospheres.