CLEANSPACE™

MASK ADAPTOR FOR QUANTITATIVE FIT

The CleanSpace Half Mask Adaptor for Quantitative Fit is designed to be used with the CleanSpace Half Masks. The mask fit test adaptor is fitted in the front of the half mask to enable a Quantitative Fit (TSI PortaCount) Test. Instructions for use are provided with the adaptor.

NOTE: The CleanSpace Full Face Mask (PAF-1014) requires the CleanSpace Full Face Mask Quantitative Fit Test (PortaCount) Adaptor (PAF-1015).

Download Data Sheet
Compatible with the CleanSpace Half Masks (PAF-0033, PAF-1010, PAF-0027)

Standard
AS/NZS1716: 2012
EN 12942
Classification
PAPR-P3
Used with the revolutionary CleanSpace Respirators: light weight, no hoses or belts
Used with the CleanSpace Half Masks only
Quick and easy to install
Fits with the TSI PortaCount equipment
Easy to wash and quick drying
Weight: 70g
Dimensions: 50mm x 50mm x 25mm
Material: High grade aluminium
Cleaning: Lukewarm water and mild detergent (neutral pH 6 – 8). Do not use solvents (turpentine or acetone), hot water, bleaching or chemical agents
Storage: –10°C to +55°C (–4°F to +131°F) at <90% relative humidity. Store away from direct sunlight, water, grease and oil
Only to be used with the CleanSpace2 PAPR power units
Welding, Woodworking, Manufacturing, Smelting, Construction, Recycling Plants, Emergency Services, Mining, Agriculture, Processing Plants, Grinding, DIY, etc.
Online training available with verification for compliance purposes. Register HERE.
CleanSpace respirators are air filtering, fan assisted positive pressure masks and designed to be worn in environments where there is sufficient oxygen to breathe safely. Do not use the CleanSpace in IDLH atmospheres, to protect against gases/vapours that cannot be filtered, or in Oxygen enriched or deficient atmospheres.