• EN 12942:1998 + A1 2002 + A2:2008 A1 2002 TM3 P R SL (Europe CE / UK UKCA)
• AS/NZS1716:2012 PAPR-P3 (P2 with Half Mask) (Australia/NZ)
• ISO 9001 (Quality Management System)
• IP Rating 66 (Ingress Protection Level for Dust / Water)

Suitable for everyday environments which require respiratory protection against airborne particulate contaminates including:*

• Stone, cement and concrete handling
• Woodwork – Cutting, turning or sanding timber
• Agriculture – mowing, reaping and mulching operations.
• Maintenance and cleanin.

*Please refer to Data Sheets for more inforamtion.

• Positive pressure and breath-responsive respirator
• Visual and audible alarms: 75dB(A) – at ear
• Peak airflow: 200 L/min
• Weight (Power Unit): < 350 g
• Operating time: up to 8 hours*
• Automatic mode change: Standby to Off after 3 minutes
• Battery: Lithium-ion polymer
• Battery recharge time: < 2 hours (to 95%)
• AC Adaptor Charger: input 100 – 240V

*Operating time is strongly affected by filter type, filter loading, mask seal, work rate, altitude, and other factors. The operating times quoted above are average durations at moderate work rates at sea level. Actual operating times may vary widely from the quoted average durations.

• Use temperature range: : –10°C to +45°C (14°F to +113°F) at < 90% relative humidity
• Charging temperature range: 0°C to 35°C (32°F to 95°F)
• Storage conditions: +10°C to +30°C (+50°F to +86°F) at < 75% relative humidity
• Battery charge maintained for up to one year when in storage

CleanSpace respirators are air filtering, fan assisted, positive pressure systems and designed to be worn in environments where there is sufficient oxygen to breathe safely.

Do not use CleanSpace WORK in environments that are immediately dangerous to life or health (IDLH), to protect against gases/vapours, or in oxygen enriched or deficient atmospheres.

The CleanSpace WORK Power Unit is not certified as intrinsically safe.