CleanSpace EX Filter Adaptors are specifically designed to complete the CleanSpace EX PAPR System when using the CleanSpace large case filters. The Power Unit filter cover is removed and replaced with the Filter Adaptor, which the large filters are then clipped in place.

IMPORTANT: When selecting a CleanSpace Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use.

Download Data Sheet
Compatible with ALL CleanSpace PAPR power units

AS/NZS1716: 2012
IEC 60079-0:2011
IEC 60079-11:2011
EN 60079-0:2012
EN 60079-11:2012
Ex ia I Ma
Ex ib IIB T4 Gb
I M1 Ex ia I Ma
II 2 G Ex ib IIB T4 Gb
Compatible with the CleanSpace PAPR power units PAF-0060
Suitable for all CleanSpace large filters: PAF-0037, PAF-0050, PAF-0051, PAF-0052 and PAF-0077
Materials: Plastic casing (Electrically Conductive), silicone seal and steel fasteners and stainless steel springs.
Easy and quickly fitted and removed from the power unit
Weight: average 105g
Dimensions: 180mm x 100mm x 80mm
Storage and Use: –10°C to +55°C (–4°F to +131°F) at <90% relative humidity. Store away from direct sunlight, grease and oil
Only to be used with CleanSpace EX PAPR power units
Underground mining requiring “Very High” equipment protection level (Ma) and level “ia” ignition protection to Methane, where constant risk of presence exists.
Propane and Ethylene gas environment requiring “High” equipment protection Level (Gb) and level “ib” ignition protection, where the presence of such gases is likely to occur (Zone 1).
Online training available with verification for compliance purposes. Register HERE.
CleanSpace Respirators are air filtering, fan assisted positive pressure masks and designed to be worn in environments where there is sufficient oxygen to breathe safely. Do not use the CleanSpace in IDLH atmospheres, to protect against gases/vapours that cannot be filtered, or in Oxygen enriched or deficient atmospheres