PAF-0040 CleanSpace2 & Ultra Battery Charger (spare)



The CleanSpace2 and CleanSpace Ultra Battery Charger is specifically designed to recharge the internal lithium polymer battery of the CleanSpace Power Units. The battery charger has two leads and interchangeable plugs for use in different countries.

IMPORTANT: If you are using a CleanSpace EX (PAF-0070) PAPR, please refer to the CleanSpace EX Battery Charger (PAF-0066) for Intrinsically Safe.

Download Data Sheet
Compatible with the CleanSpace2 (PAF-0034) and CleanSpace Ultra (PAF-0070)

AS/NZS1716: 2012
EN 12942
AS/ NZS 1337.1:2010 High Impact Resistance
Used with the revolutionary CleanSpace PAPR: light weight, no hoses or belts
Multinational interchangeable plugs
Dual leads for charging two PAPR power units simultaneously
Weight: 210g
Dimensions: 163mm x 95mm x 70mm (thick)
Cleaning: This part is NOT waterproof. Do not use solvents (turpentine or acetone), hot water, bleaching or chemical agents
Storage and Use: –10°C to +45°C (–4°F to +113°F) at <90% relative humidity. Store away from direct sunlight, grease and oil
Only to be used with the CleanSpace2 and CleanSpace Ultra PAPR power units
Welding, Woodworking, Manufacturing, Smelting, Construction, Recycling Plants, Emergency Services, Mining, Agriculture, Processing Plants, Grinding, DIY, etc.
Online training available with verification for compliance purposes. Register HERE.
CleanSpace respirators are air filtering, fan assisted positive pressure masks and designed to be worn in environments where there is sufficient oxygen to breathe safely. Do not use the CleanSpace in IDLH atmospheres, to protect against gases/vapours that cannot be filtered, or in Oxygen enriched or deficient atmospheres.