CLEANSPACE™

HIGH CAPACITY (HI CAP) PARTICULATE P3 FILTER

The CleanSpace High Capacity Particulate P3 TM3 P SL R is suitable for protection against airborne particulate (dust, mists and fumes).

IMPORTANT: When selecting a CleanSpace Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use.

Download Data Sheet
Compatible with ALL CleanSpace PAPR Power Units

Standard
AS/NZS1716: 2012
EN 12942
Classification
PAPR-P3
The CleanSpace High Capacity Particulate Filter must be used in conjunction with the CleanSpace Filter Adaptor (PAF-0038)
Used with the revolutionary CleanSpace – A light weight PAPR with no hoses/belts
Suitable for protection against airborne particulate (dust, mists and fumes).
Materials: Fibreglass particulate media and plastic casing, silicone seal
Materials: Fibreglass particulate media and plastic casing, silicone seal
Weight: average: 100g Dimensions: 170mm x 40mm x 70mm
Packaged Shelf life: 3 years from manufacturing date
Materials: Spun polymer fibres
Storage and Use: –10°C to +55°C (–4°F to +131°F) at <90% relative humidity. Store away from direct sunlight, grease and oil
Only to be used with CleanSpace PAPR Power Units
These filters are not water proof and should be replaced if in contact with water
Mining, Welding, Manufacturing, Smelting, Construction, Recycling Plants, Emergency Services, Agriculture, Processing Plants, Grinding.
Refer to Filter Selection Table for more details.
Online training available with verification for compliance purposes. Register HERE.
CleanSpace respirators are air filtering, fan assisted positive pressure masks and designed to be worn in environments where there is sufficient oxygen to breathe safely. Do not use the CleanSpace in IDLH atmospheres, to protect against gases/vapours that cannot be filtered, or in Oxygen enriched or deficient atmospheres.