CLEANSPACE™

NECK PADS

The CleanSpace2 Neck Pads are designed to be used with CleanSpace2 Respirators (PAF- 0034). The Neck Pads (thick and thin) are included with every CleanSpace2 (PAF-0034) unit and may be used alternately. These parts (PAF-0014 and PAF-0016) are spares used for replacement in case of damage or loss. The Neck Pads are made of foam with neoprene (fabric) covering and are attached to the unit using Velcro strips.

IMPORTANT: These neck pads are fabric with Velcro and should NOT be used when handling friable asbestos or in Intrinsically Safe certified zones.

Download Data Sheet
Compatible with the CleanSpace2 Respirators (PAF-0034)

Standard
AS/NZS1716: 2012
EN 12942
Classification
PAPR-P3
Used with the CleanSpace2 Respirators: light weight, no hoses or belts
Designed for comfort over long periods
Allows sweating and offers breathability
Easy to wash and quick drying
Designed for long wear in harsh environments
Easy and quick replacement
Weight: 8g (thin) and 20g (thick)
Dimensions: 163mm x 95mm x 5mm (thin) – x 30mm (thick)
Cleaning: Lukewarm water and mild detergent (neutral pH 6 – 8). Do not use solvents (turpentine or acetone), hot water, bleaching or chemical agents
Storage: –10°C to +55°C (–4°F to +131°F) at <90% relative humidity. Store away from direct sunlight, grease and oil
Only to be used with the CleanSpace2™ PAPR power units
Welding, Woodworking, Manufacturing, Smelting, Construction, Recycling Plants, Emergency Services, Mining, Agriculture, Processing Plants, Grinding, DIY, etc.
Online training available with verification for compliance purposes. Register HERE.
CleanSpace respirators are air filtering, fan assisted positive pressure masks and designed to be worn in environments where there is sufficient oxygen to breathe safely. Do not use the CleanSpace in IDLH atmospheres, to protect against gases/vapours that cannot be filtered, or in Oxygen enriched or deficient atmospheres.